11-07-2013, 14:27
Ho scoperto anche un altra cosa... Da quello che ho capito i pannelli arrivano già laminati da entrambi i lati e nel lavoro di costruzione va laminata solo la giunzione (sovrapponendo naturalmente alla laminazione precedente). Almeno questo è quello che ho capito io, questa una parte della mail:
'Jeff’s preference for material in our designs in Balsa end grain cores. These are made into panels using epoxy systems with E Glass cloth on each side, 1 x 600gm Biaxial cloth is standard. ... The panels are stiff and light, easy to handle. Because the fibre glassing is largely done, there is a lot of taping and not too much actual laminating expect for the strip planked parts.'
Voi che dite?
'Jeff’s preference for material in our designs in Balsa end grain cores. These are made into panels using epoxy systems with E Glass cloth on each side, 1 x 600gm Biaxial cloth is standard. ... The panels are stiff and light, easy to handle. Because the fibre glassing is largely done, there is a lot of taping and not too much actual laminating expect for the strip planked parts.'
Voi che dite?
