11-03-2014, 20:25
Non tirate conclusioni affrettate senza conoscere bene l'argomento
potrebbe esserci anche qualcuno che,per non saper ne leggere ne scrivere,fa (piu' o meno) quello che e' scritto nel manuale del motore
da pagina 40 del YM Series Operation Manual
2009 Yanmar Marine International
SHUTTING DOWN THE
ENGINE
NOTICE: NEVER stop engine abruptly
during operation. Yanmar recommends
that when shutting the engine down, allow
the engine to run, without load, for 5
minutes. This will allow the engine
components that operate at high
temperatures, such as the exhaust system,
to cool slightly before the engine is shut
down.
1. Reduce engine speed to low idle and
put remote control handle in
NEUTRAL.
2. Accelerate from low speed to high
speed and repeat five times. This will
clean out the carbon from the cylinders
and the fuel injection nozzles.
potrebbe esserci anche qualcuno che,per non saper ne leggere ne scrivere,fa (piu' o meno) quello che e' scritto nel manuale del motore
da pagina 40 del YM Series Operation Manual
2009 Yanmar Marine International
SHUTTING DOWN THE
ENGINE
NOTICE: NEVER stop engine abruptly
during operation. Yanmar recommends
that when shutting the engine down, allow
the engine to run, without load, for 5
minutes. This will allow the engine
components that operate at high
temperatures, such as the exhaust system,
to cool slightly before the engine is shut
down.
1. Reduce engine speed to low idle and
put remote control handle in
NEUTRAL.
2. Accelerate from low speed to high
speed and repeat five times. This will
clean out the carbon from the cylinders
and the fuel injection nozzles.