18-01-2019, 01:30
Copio ed incollo dal forum della Raymarine:
Unfortunately, your suggestion to interface the AIS receiver / transceiver to any device other than the MFD's NMEA 0183 input port is not valid for the following reasons:
- unlike SeaTalkng / NMEA 2000 communications protocol, SeaTalk communications protocol does not support communications of AIS data.
- Raymarine autopilot course computers featuring a NMEA 0183 communications interface are exclusively designed to support 4800 BAUD data rates. AIS receivers / transceivers supporting NMEA 0183 communications are designed to support 38400 BAUD.
- C-Series Classic MFDs are exclusively designed to support reception of AIS data via the MFD's NMEA 0183 communications interface. The NMEA 2000 and SeaTalk communications interfaces of C-Series Classic MFDs cannot be used to support communications with an AIS receiver / transceiver.
Unfortunately, your suggestion to interface the AIS receiver / transceiver to any device other than the MFD's NMEA 0183 input port is not valid for the following reasons:
- unlike SeaTalkng / NMEA 2000 communications protocol, SeaTalk communications protocol does not support communications of AIS data.
- Raymarine autopilot course computers featuring a NMEA 0183 communications interface are exclusively designed to support 4800 BAUD data rates. AIS receivers / transceivers supporting NMEA 0183 communications are designed to support 38400 BAUD.
- C-Series Classic MFDs are exclusively designed to support reception of AIS data via the MFD's NMEA 0183 communications interface. The NMEA 2000 and SeaTalk communications interfaces of C-Series Classic MFDs cannot be used to support communications with an AIS receiver / transceiver.
