guarnitura passascafi

[kavokcinque]

Ho seguito per i miei passascafo Trudesign le istruzioni del fabbricante.

Recommended Hull Adhesive Sealants & Glues:
First clean all surfaces to be bonded with a general-purpose cleaner.
• 3M Marine Adhesive Sealant Fast Cure 5200. A one-part polyurethane adhesive/sealant. Starts to
cure (tack-free) in approximately 2 hours, after which hoses can be attached. Full cure takes 24
hours – refer to manufacturer’s product literature.
• SIKAFLEX 291i and 591 Marine Sealants – refer to manufacturer’s product literature.
• Bostik 920 Marine Sealant. A one-part urethane adhesive/sealant. Starts to cure (tack-free) in
approx. 2 hours, after which hoses can be attached. Full cure takes 1.5 – 3 days – refer to
manufacturer’s product literature.
• West System (or similar) two-pot epoxy that mixes to a paste. Tip – adding filler to th

Non da l'opzione del 3M FC 4200 . La danno invece, come opzione, per il collegamento valvole/passascafo indicando pero' che il 4200 ha la metà della forza bloccante del 5200.